Small tuning model for petite drivers
ZETAIV Verio is a model that has been tuned for slim and small drivers based on the BRIDE full bucket seat standard model ZETAIV.
BRIDE's flagship model ZETA IV has been further tuned for use in various scenes, from public roads to hard sports driving, with a shell design that fits the Japanese body shape and skeleton. Mainly focused on slim and petite drivers under 160cm.
The side supports from the flanks to the thighs are about 30mm narrower than the standard model, allowing the slim body to fit tightly and fully demonstrate the original holding performance of the full bucket seat. In addition, about 15mm high hardness urethane is adhered to the bottom of the seat, and in addition to the normal seat cushion, removable about 15mm urethane is built in, and the maximum seat surface is about 30mm. Up is possible.
The shell material is an FRP silver shell, and the seat color is black.
White BRIDE logo and gray Verio logo are embroidered on the front and back of the headrest.
ZETA IV Verio is an FIA standard acquisition model.
*Free Shipping to lower 48 states only.
Tuned for slim, petite drivers
The ZETAIV Verio has been tuned in the same way as the ZETAIV VERIA, and the cushion urethane on the sides is about 30mm thicker than the standard model. Approximately 15mm of high hardness urethane is adhered to the bottom of the seat, and a removable approximately 15mm of urethane is also built into the seat cushion, allowing the seat to be raised up to approximately 30mm. This also eliminates the mismatch between the body and the headrest/shoulder support that tends to occur with small drivers.
Conforms to FIA standards and safety standards
ZETA IV Verio is a product that complies with the safety standards of the Road Transport Vehicle Act (car inspection). In addition, it has also acquired the [FIA8855-1999] standard set by the FIA (International Automobile Federation), so it can be used in international races and competitions. We maintain a design and quality that can withstand even more severe tests, ensuring a high level of safety.
In addition, a seat sensor is mounted on the seat surface. (Depending on the car model, it may not be compatible.)
