The angry guy came to our office to fight………
But he became happy after we gave him magazine.
Aug 18
NEW: Stabilizer Bar for 2010 Toyota Prius
NEW Sustec Stabilizer Bar for 2010 Toyota Pruis (Front Sway Bar)
Front Sway Bar diameter: OD 25.4mm (outside diameter)
Material: Chromoly Construction Bar, Rubber Bushings (retain factory bushing brackets)
PART #: TSB153F
Product feedback from vehicle tested: http://priuschat.com/forums/gen-iii-2010-prius-accessories-modifications/96098-testing-tanabe-front-sway-bar.html
Other Products Available for 2010 Toyota Pruis
Sustec Tower Bar, Sustec Under Brace, DF210 Lowering Springs, NF210 Lowering Springs, Medalion Touring Axle Back Exhaust System
Related Images:
Aug 15
Lexus IS300 with SSR SP1
Check out this Lexus Is300 with SSR Professor SP1 in SBC!
Sizes are 18X9 all around!
Thanks to Tom New Jersey for the pictures!
-D.
Related Images:
Aug 14
Pictures from Mazfest 2011
A bunch of friends and I went down to Mazfest this weekend and had a great time! It’s an all Mazda gathering that was held at Auto Club Speedway in Fontana, CA. Speed Ventures was also holding ah HPDE event and Autocross event at the same time so there was a lot going on with lots to see. The weather was hot but thankfully we kept cool under the Tanabe USA Tent. Here are some of the pictures that I took! Enjoy!
Related Images:
Aug 12
Sweet Juicy Melons…
VP brought us some ice cream bars to cool us off on a warm Friday afternoon. By the name on the label you’d think it was melon flavored but it’s actually strawberry flavored and oh so delicious! I thought it was JDM since it was bought from a Japanese market but it has Spanish writing on it too.. -__-
Thank you to the man upstairs!
-D.
Related Images:
Aug 11
The FD got a stiffy…
I installed a Tanabe Front Sway bar on my FD RX7 and I couldn’t be happier with the results. The car already has legendary handling but with the added front sway bar, the turn in and steering is even more responsive! The car takes turns much better and I feel as if it’s hugging the road better. The install only took a few minutes and it was a direct replacement. It also came with new bushings to replace the OEM ones that are worn out and cracking. After a few weeks I’ll decide on if I want to add a rear sway bar to go with it. I can’t believe I didn’t take pics of the install itself but I’ll get some up soon. Here some pictures comparing the oem vs. the Tanabe one though.
-D
Related Images:
Aug 11
JUST ADDED: NEW Tanabe Applications
MAZDA 3
Medalion Touring Exhaust: T70154A (CLICK HERE)
MAZDA 2
UnderBrace: TTB159F (CLICK HERE)
Scion tC 2011+
Tower Bar: TTB160F (CLICK HERE)
UnderBrace: TUB160F (CLICK HERE)
Medalion Touring Exhaust: T70160A (CLICK HERE)
Concept G Exhaust: T80160A (CLICK HERE)
Toyota Prius ZVW30
SwayBar: TSB153F (CLICK HERE)
Related Images:
Aug 09
Tanabe Rear SwayBar Install COMMENCE!
So I finally got my hands on the Tanabe Rear Sway-Bar for my Subaru.
Hitting myself on the head for this… why I never got this long time ago. Such a great product and great mod for my car. I highly recommend this.
So let’s start here… Order: From prepping to Install to Finish Install.
With my current suspension set up the car is more predictable and stable during hard turns. The rear slides out a bit (oversteer increase) which is what I was looking for. Knowing subaru they love to understeer. Also, during the turns, I find it easier to correct my mistakes. If you drive a subaru you know you have to apply throttle during the turn to catch traction. And yes, there is less body roll. I’ll have to balance the car with front sways. Which I will be doing soon =]
Oh and I wanna thank you two for helping with the install… you know who you are :3
Related Images:
Aug 08
Custom Finished Blue SSR Sp3 on a Subie
Check out this clean Subaru from this past weekend’s Spocom show in Anaheim! Check out some custom finished SSR Professor Sp3 on this bad boy! Those brembo brakes fill in the wheels quite nicely!
Pictures were taken from Night-Import. For more pictures of even coverage, check here:http://www.night-import.com/2011/08/event-coverage-spocom-2011-pt-i.html
Related Images:
Aug 05
SSR SP1 on 3rd Gen RX7
Check out this install of the SSR SP1 in Super Black Coat on this FD Rx7! Thanks to Don from Sound FX in Lewes, DE for the pictures. Contact them for a set for your own car!
Check out their facebook page here: http://www.facebook.com/SoundFXHomeCar
Related Images:
Revel USA
Links
